Series 160 static mixers have a bell mouth which fits most standard meter mix valve manifolds and many types of cartridges.

Largest disposable bell mouth mixer on the market, for high volume mixing and dispensing with meter mix valves.

For dispensing from 50 ml 2 part cartridges. They feature a standard bayonet connection and benefit from a shorter mix length meaning less retained waste.

The shortest mixer on the market, with a 30% reduction in retained waste. Comes with an integral nut or bell inlet for uses with valves or cartridges.

Designed exclusively for use with 50 ml two part cartridges. Choice of four outlet styles: Slip Luer, Full Bore, H-tapered & Stepped.

Square mixers with an integral 7/8-9 nut. The square geometry provides efficient mixing over a shorter length allowing closer control.

For high flow applications, featuring a 14.3 mm element width with either a 1/8-9 or 7/8-14 double lead thread inlet.

Low pressure air assisted spraying mixer, used with valves or cartridges for applying two part reactive coatings.

Designed for dispensing PU foam from meter mix valves. Extended tip helps reduce separation once the urethane has left the mixer.

Fully Polypropylene mixers available with either a standard bell inlet or with an integral 7/8-9 nut for connecting directly to valves or cartridges.

Designed for use with the Pro-Tip ribbon bead accessory - available in 12mm or 25mm; the perfect ribbon bead dispensing nozzle.

We have a wide range of static mixer accessories such as:- Block Two-port manifolds. Mixer tips. manifold adaptors. Mixer retaining nuts. Pressure resistant mixer jackets.