Integrated Servo Dispenser
1K fluid dispenser for viscous sealants and adhesives
The ISD meter is available in single-acting or double-acting metering for precise flow of 1-component medium to high viscosity materials.
This system is ideal for sealer dispensing applications requiring high volumes dispensed quickly without reloading, and is suitable for use in robotic applications.
ISD systems typically use 2-ball or chop-check high volume pumps. Select a dispensing valve from a wide selection including Servo-Ribbon Applicator, Multi-Stream Applicator, Slotted Nozzle Applicator, Snuf-Bak, Tip-Seal and No-Drip for extruding, streaming and spraying materials.
Meter options include waterborne/abrasive material design, DeviceNet and material temperature control.
Features and benefits
• Robot servo motor drives shot meter for desired flow rate
• Double-acting metering technology for continuous flow dispensing
• Surge-free material flow rate for precise bead profiles
• Flow rate is variable during the dispense cycle for varying tip speed or bead profile
• Designed for low- to high-viscosity unfilled and abrasive filled sealer materials
• Designed for up to 0.9 gallons per minute flow rates
• Includes wear-resistant wetted components and long life seals
• Stand-mounted or frame-mounted
• Recirculation capability to prevent material curing when not dispensing
| Meter Volume per Stroke | 12.0 Cubic Inches or 196.6 cubic Centimeters |
| Max. Working Pressure | 3,500 PSI (241.3 bar) |
| Relief Pressure | 4,000 PSI (nominal) |
| Weight | 291 lbs. |
| Maximum Flow Rate | 0.9 GPM or 75 cc/sec |
| Minimum Supply Requirements | 600 PSI (41.37 bar) at 0.9 GPM (75 cc/min) |
| Maximum Inlet Pressure | No greater than 500 psi higher than normal dispensing pressure |
| Inlet and Outlet Connections | 3/4" NPTF (inlet & outlet ports at both top & bottom of manifold) |
| Compressed Air Requirements | 0.5 SCFM @ 80 PSI filtered to 100 micron or better |
| Compressed Air Connections | 1/4" NPTF |